Ar-15 Ambidextrous Charging Handle Vltor Weapon Systems
"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15 Ambidextrous Charging Handle Vltor Weapon Systems You will not regret if check price." for sale Ar-15 Ambidextrous Charging Handle Vltor Weapon Systems
Ar-15 Ambidextrous Charging Handle Vltor Weapon Systems.
Provides Quality and Versatility
Adding another exclusive in a long list of specially built items available only from Brownells, we've teamed up with VLTOR to offer an enhanced model of the company's AR-15 Ambidextrous Charging Handle.
Machined from billet aluminum and featuring added material left in place to strengthen stress points, the charging handle is purpose-built to handle the harshest environments imaginable.
Each Brownells/VLTOR charging handle features latches on the left- and right-hand sides of the unit, and the oversized design allows the force of a user's pull to be distributed evenly across the entire handle. This redirects stress away from the roll pin, preventing breakage. The charging handle is available only in an all-black finish.
Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International.
Upgraded Design For Increased Durability & Dependability
Updated design of the standard AR-15 bolt features a fully supported breech face and a dual-spring extractor system for extra strength and reliability to handle the 6.8 Remington SPC II or 224 Valkyrie cartridge. Machined from an extremely hard steel alloy normally used in high-stress/heat applications like race car transmissions, then shot-peened and x-rayed for flaws before plating with a nickel-boron (NiB) coating. NiB coating significantly reduces friction coefficient, so the bolt is less likely to be hung up by fouling, and wear-resistance is greatly enhanced. Super-slick surface makes cleanup easy because carbon and gunk have a hard time sticking to it.
AR-15, Issue:11, Page:013
Big Book Catalog, Issue:71, Page:013
SPECS: Ultra-hard steel alloy, nickel-boron plated, silver finish. Comes complete with ejector, extractor, and gas rings installed. Fits a standard AR-15 carrier.
M16 5.56 Lightweight Bolt Carrier Group Brownells.
Designed for Lightweight, Low-Recoil Rifles
The Brownells M16 Lightweight Bolt Carrier Group is purpose-built for AR-15 owners looking to improve aspects of their rifle with a simple component swap, eliminating the need for major component replacement or amateur gunsmithing work.
The Brownells M16 Lightweight Bolt Carrier Group is machined from 8620 tool steel and features a heavy-duty bolt made using 9310 tool steel, which is then magnetic-particle inspected to ensure quality. The bolt is light enough to reduce the overall weight of a lightweight AR build, and the lightness of the entire assembly also reduces the felt recoil of any AR-style firearm.
- Available with nickel-boron, titanium-nitride or nitride finishes
- Weighs 8.2 ounces
- Compatible with AR-15s chambered in 5.56 NATO, .223 Rem., 300 Blackout and .204 Ruger
The Brownells M16 Lightweight Bolt Carrier Group ships completely assembled and features the necessary black insert and O-ring around the extractor, as well as a torqued and staked gas key.
308ar Bolt Carrier Group Nitride Mp Brownells.
The Ideal Big-Bore Bolt Carrier Group
The Brownells Complete .308 Bolt Carrier Group is designed to operate reliably in DPMS LR-308 pattern rifles chambered in .308, .243, 7mm-08, .338 Federal, .260 Remington, 6.5mm Creedmoor, or any other cartridge based on the .308 Winchester. These BCGs are manufactured to the same uncompromising standards as our M16-style BCGs.
Our Complete .308 Bolt Carrier Group has a bolt machined from robust 9310 steel, heat-treated and shot-peened for superb hardness. The carrier itself is fabricated from hardened 8620 steel. Both are magnetic particle inspected (MPI) to make sure there are no hidden microscopic flaws that could lead to premature failure.
- Carrier has forward assist notches
- Extractor is installed with rubber insert and spring
- Gas key screws are torqued and staked
- For use in DPMS LR-308 pattern upper receivers only; NOT compatible with Armalite rifles
You can get the Brownells Complete .308 Bolt Carrier Group with a hard Black Nitride finish that is exceptionally resistant to surface wear OR a Nickel Boron coating (a dull matte silver) that’s even harder and self-lubricating to boot. Both come complete with firing pin, firing pin retaining pin, cam pin, gas rings, gas key, extractor, and ejector installed.
Brownells GunTech™ Note: Unlike BCGs with a traditional Parkerized finish, the carrier on our Black Nitride bolt carrier group is not hard-chromed inside because Nitride is actually harder than industrial chrome plating.
Big Book Catalog, Issue:71, Page:011
M16 5.56 Bolt Carrier Group Nitride Mp Brownells.
Reliability for the Discerning Operator
The Brownells M16 5.56 Complete Bolt Carrier Group is designed to work easily and reliably in any AR-15 or M16 rifle chambered in 5.56x45mm, 300 AAC Blackout or .223 Remington.
The Brownells M16 5.56 Complete Bolt Carrier Group is constructed with a bolt made from 9310 steel, which is finished with a heat treatment and shot peening. The carrier is fabricated from 8620 hardened steel. Each element of the bolt-carrier group is finished in a black-nitride coating.
- Magnetic-particle inspected material
- Extractor includes spring and rubber insert
- Includes torqued and staked gas key
- Functions with any cartridge based on the 5.56 NATO cartridge case
The Brownells M16 5.56 Complete Bolt Carrier Group comes with a bolt, bolt carrier, gas key, firing pin, cam pin and a firing pin retaining pin.
Big Book Catalog, Issue:71, Page:011
Ar-15/m16 22lr Bravo Conversion Kits Cmmg.
Use Economical .22 LR Ammo To Practice More & Hone Critical Shooting Skills
Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Helps you concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive centerfire ammo.
Simply replace the rifle’s bolt and carrier with the Bravo .22 LR conversion unit, load up the included magazine with round-nose .22 LR ammo, and you're ready to shoot.
Precision machined from high-grade stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5.56mm NATO, including most gas piston systems.
Note: CMMG recommends Federal 36 grain plated round-nose ammunition for best performance. Works best with round-style AR-15 hammers; notched hammers can cause function problems.
Note: For Direct Gas Impingement AR-15's. Not compatible with Gas Piston Systems without removing the piston. Only for use in 5.56 NATO chambered AR-15 rifles.
AR-15, Issue:09, Page:007
Big Book Catalog, Issue:71, Page:009
SPECS: Stainless steel bolt group, brass extension bushing.