Web Analytics Made Easy -
    StatCounter

Sinclair Concentricity Gauge Sinclair International

"Today, if you do not want to disappoint, Check price before the Price Up.Sinclair Concentricity Gauge Sinclair International You will not regret if check price."  who sells the cheapest Sinclair Concentricity Gauge Sinclair International on line

Content:

Sinclair Concentricity Gauge Sinclair International.

$89.99 - $149.99
We believe the Sinclair Concentricity Gauge is the easiest to use and most accurate gauge of its kind on the market. Precision ...

Product Description

We believe the Sinclair Concentricity Gauge is the easiest to use and most accurate gauge of its kind on the market. Precision made for a lifetime of use, the Sinclair Concentricity Gauge will accept cases up to 50 BMG.

The Sinclair Concentricity Gauge is used to measure runout by rotating the case or loaded round on two sets of bearings that are captured in anodized aluminum blocks. These bearing blocks are adjustable longitudinally to allow for different case lengths or varying lengths of loaded rounds. The handloader can measure sized cases on the neck, and measure loaded rounds on the neck or out on the bullet. The bearing blocks ride in a milled slot in the gauge base plate. This milled slot keeps the blocks in alignment with each other.

This arrangement provides the best support for the cartridge, enabling the user to spin the cartridge smoothly. Large thumb levers on the bearing blocks make adjustments quick and easy. The anodized base plate is extremely stable allowing the user to take accurate readings. The indicator tower is designed to permit vertical and side-to-side adjustment of the dial indicator. The mounting block for the dial indicator is designed to accommodate dial indicators with standard 0.375" mounts. This is a quality measuring tool for the serious precision reloader.


Big Book Catalog, Issue:68, Page:532
Sinclair, Issue:5B, Page:029

Sinclair Bump Gage Insert Sinclair International.

$9.99 - $15.99
Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump ...

Product Description

Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR-15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the same cartridge and checking loaded ammunition.


Big Book Catalog, Issue:68, Page:531
Big Book Catalog, Issue:68, Page:532
Sinclair, Issue:5B, Page:027
Sinclair, Issue:5B, Page:034

Sinclair Insert Style Bullet Comparator Sinclair International.

$7.99 - $15.99
This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step ...

Product Description

This Sinclair Comparator is an excellent tool to use to sort bullets by base to give length. This is a valuable step if you are considering trimming the bullet meplat. NOTE: When sorting a lot of bullets, a digital caliper is sometimes a better choice for some handloaders than a dial caliper. An alternative tool to use for sorting bullets is our Sinclair Bullet Sorting Stand (#59-2000) which uses its own unique comparators.

Our Sinclair Bullet Comparator attaches to the blade of your caliper and uses inserts for each specific caliber. The inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure the bullet's bearing surface of the bullet. Comparator inserts are available in 17 thru 45 caliber, and they can be used in both the Sinclair and older Stoney Point comparator bodies. These inserts are not intended to measure rounds seated to magazine length or shorter. For this application please see our Sinclair Bullet Comparators (#09-600 and #09-700). 


Big Book Catalog, Issue:68, Page:531
Big Book Catalog, Issue:68, Page:532
Sinclair, Issue:5B, Page:027
Sinclair, Issue:5B, Page:034

Wilson Case Gage L.e. Wilson, Inc..

$26.99 - $41.99
The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common ...

Product Description

The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper.

Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing.

Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder.

SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY


Big Book Catalog, Issue:68, Page:532
Sinclair, Issue:5B, Page:035
Sinclair, Issue:5B, Page:079

Lock-N-Load Modified Cases Hornady.

$5.99 - $24.99
There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not ...

Product Description

There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not listed. Details are available in the instructions. Modified cases will not work in tight neck chambers, except for the CFG-6PPCT.


Big Book Catalog, Issue:71, Page:468
Sinclair, Issue:5B, Page:026

Length Gauge Hornady.

$29.99 - $36.99
The Hornady Lock-N-Load OAL Gauge (formerly Stoney Point) is an extremely easy to use tool. It only takes a couple of minutes ...

Product Description

The Hornady Lock-N-Load OAL Gauge (formerly Stoney Point) is an extremely easy to use tool. It only takes a couple of minutes to find the overall length for a particular bullet. The tool is threaded on one end to accept specially modified cartridge cases. Once threaded onto the tool, a bullet is inserted into the cartridge. The tool is then inserted into the chamber of your rifle. The push rod on the tool is used to push the bullet up against the rifling. The rod is then locked in place and the tool can be removed from the rifle. You then measure across the base of the cartridge and the top of the bullet with your dial calipers (use of a bullet comparator at this time is highly recommended) to obtain the OAL. If you want to check another type of bullet, insert the new bullet into the tool and repeat steps.

There are two different models of OAL Gauge tools available. Straight is designed specifically for bolt-action rifles and single shot rifles. The Curved  model is designed for autoloaders and lever actions. Both models utilize the same modified cases. Either tool will work on the AR-15 type rifles. This tool is excellent for periodically checking the throat erosion of a rifle barrel. Great for checking out used rifles. There are over 60 different modified cases available to use with this tool.


Big Book Catalog, Issue:71, Page:468
Sinclair, Issue:5B, Page:026

SPECS: Gauge- Machined aluminum, 12" (30cm) long, anodized finish, red. Straight Gauge for bolt and single shot actions. Curved Gauge for auto, pump, and lever actions.


Comments(0)

Leave a comments