Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc
"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc You will not regret if check price." price comparisons for Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc
Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc.
Put A Folding Stock On Any AR-Pattern Rifle!
Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating.
Will only work with compatible centerfire and mil-spec carriers.
Does Not work with any AR 9mm BCG.
AR-15, Issue:11, Page:048
Big Book Catalog, Issue:71, Page:052
SPECS: Machined 4140 steel, DLC finish, matte black. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded.
Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul.
The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting.
- Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)
- Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
- Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height
- Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
- Steel adjustment shafts finished with melonite for wear and corrosion resistance
- All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing
- Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod
- Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible)
NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.
Big Book Catalog, Issue:71, Page:050
Ar-15 Stock Assy Collapsible Mil-Spec Brownells.
Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles.
AR-15, Issue:11, Page:042
Big Book Catalog, Issue:71, Page:046
SPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, matte black. 8¾" (22.2cm) OAL collapsed; 11¾" (29.9cm) OAL fully extended
Ar-15 Ctr Stock Collapsible Mil-Spec Magpul.
Locking System Eliminates "Play"
Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, Dark Earth, and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines.
AR-15, Issue:11, Page:045
Big Book Catalog, Issue:71, Page:049
SPECS: Impact-resistant nylon polymer, Black, Dark Earth or O.D. Green.. LOP adjustment range, 3½" (8.9cm). Mil-Spec - 67⁄8" (17.5cm) OAL, 5¼" (13.34cm) high. Fits fits mil-spec 1.14" O.D. carbine buffer tubes.
Ar-15 Retro Furniture Sets Brownells.
Recreate an American Classic with the Brownells M16A1 Furniture Kits, built to accurately replicate the original Stock issued to thousands of American servicemen & women.
The included M16A1 style buttstock, handguard and pistol grip are modeled off of original components, designed to bring affordable, original type gear back to market. There is surplus available, but these parts are continuing to dry up and the quality is often quite poor. Excellent condition items are getting quite expensive. With these furniture kits, you can outfit your favorite Retro rifle in the proper stylings of the period.
Available in several different colors including:
- Black - Proper for Model 602, XM16E1, M16A1 & later generation rifles introduced after 1963
- Green - Proper for early Model 601 rifles, the first AR-15 adopted by the US Air Force in 1959
- Brown - Similar to the earliest AR-15 Prototype rifle furniture used in the late 1950s
Retro furniture from Brownells is not an exact copy of original components or their construction. Some areas have been changed due to manufacturing methods or to avoid counterfeit concerns.
Remington Pro 700 Sa Chassis Adjustable Magpul.
Completely Adjustable Rifle Chassis
Magpul’s Pro 700 Rifle Chassis combines innovative engineering and precision machining to create a full featured precision rifle chassis for Remington 700 actions. Based on a full billet 6061-T6 aluminum skeleton, the Magpul Pro 700 Rifle Chassis is clad in Magpul polymer for comfort, noise mitigation, and ergonomics. With the swap of a bolt-cutout plate, a reversible cheek riser, and reversible hinge, the chassis is fully ambidextrous, ensuring that left handed shooters are included in the fun!
The Pro 700 Rifle Chassis features an injection molded polymer grip with 5-degree forward edge sweep and enlarged palm swell with 7-degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench. Users can adjust the comb height to 1” with a secondary locking knob, eliminating movement to the cheek riser. An Integrated AICS pattern magazine made of reinforced polymer is included and optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines.
- Reversible, durable push-button hinge to fold the stock
- Overall LOP adjustment range: 13.25”-15.125”
- Butt pad height adjustment: .90”–1.33”, adjustable 5 degrees left or right
- Cheek riser: 3-position fore/aft adjustment of +.375”, 0” and -.375”; left- or right-handed adjustable
- Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
- M-LOK slots available for accessory mounting
- The magazine release is melonite treated steel that is low-profile and ambidextrous
A large trigger guard found on the Pro 700 accepts most factory and aftermarket curved or flat triggers, and can be used with gloves. A melonite treated steel magazine release is low-profile and ambidextrous.
The Magpul Remington 700 Pro Chassis fits up to an MTU barrel contour and is available in black, flat dark earth, and od green. The Remington 700 Pro Chassis would be a great upgrade to an existing gun, or for your next build!
Big Book Catalog, Issue:71, Page:186