Web Analytics Made Easy -
    StatCounter

Lock-N-Load™ Headspace Gauge Tool Hornady

Who sells cheap Lock-N-Load™ Headspace Gauge Tool Hornady You can order Lock-N-Load™ Headspace Gauge Tool Hornady after check, compare the values and check day for shipping. Some people are are interested to buy Lock-N-Load™ Headspace Gauge Tool Hornady with the cheap price. While the item could possibly be priced similarly at different shops.

Content:

Lock-N-Load™ Headspace Gauge Tool Hornady.

$29.99 - $47.99
This affordable headspace gauge set from Hornady Lock-N-Load Products (formerly Stoney Point) allows the handloader to measure changes to the headspace of ...

Product Description

This affordable headspace gauge set from Hornady Lock-N-Load Products (formerly Stoney Point) allows the handloader to measure changes to the headspace of cartridges with a dial/digital caliper. Different bushing sizes (depending on cartridge family) insert into the Hornady Lock-N-Load Comparator Body, which attaches to a caliper. This handloader can then measure the changes between fired and sized brass. this enables the handloader to adjust his sizing dies for a proper fit in his chamber. When a handloader oversizes his cases it can cause excessive headspace problems, one of which is to shorten the life of the brass.

The Hornady Lock-N-Load Headspace Gauge Set will allow the user to measure brass from the case head to the datum line on the case shoulder. Five bushing sizes allow you to measure the headspace on most bottleneck cartridges from 17 Remington through the belted magnums. The bushings are sold either with the Comparator Body or without the Comparator Body (for those who already have one).

View Hornady Gauge Bushing Chart.


Big Book Catalog, Issue:68, Page:533
Sinclair, Issue:5B, Page:028
Sinclair, Issue:5B, Page:035

Ball Style Micrometer Mitutoyo.

$167.99
The Mitutoyo Ball micrometer features a ball anvil set at right angles to the micrometer head. This allows the handloader to use this ...

Product Description

The Mitutoyo Ball micrometer features a ball anvil set at right angles to the micrometer head. This allows the handloader to use this tool for measuring wall thickness of brass, tubing, etc. Measures to .0001"" and features a ratchet stop. Micrometer spindle is carbide faced. Scales are easy to read.


Sinclair, Issue:5B, Page:033

Sinclair Bullet Seating Depth Tool Sinclair International.

$9.99 - $34.99
The Sinclair Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. We have ...

Product Description

The Sinclair Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. We have recently improved our seating depth tool to accommodate 17 and 20 caliber shooters without having to have two tools. Our newest model is made from one fourth inch ground and polished stainless steel with one end turned down for use with 17 and 20 caliber rifles and the other end used for 22 caliber and up. This tool helps you determine the length of a loaded round touching the rifling. This length is generally considered to be the best starting point in load development and the best length for fireforming most cases.

The Sinclair Seating Depth Tool will work with most bolt action, single shot and AR type rifles. The tool includes a Delrin action guide for most bolt-action rifles (Remingtons, Savages, Winchesters, and Rugers), a stainless steel measuring shaft, two stainless steel stop collars and complete illustrated instructions.

We also make a guide for use in AR-15's, AR-10's, and Tubb's 2000's. Many shooters load single shot rounds longer than magazine length. The guide is a little different than our standard bolt-action guides. This guide inserts into the back of the upper receiver (with the bolt removed). The tool is then used as normal.


Big Book Catalog, Issue:68, Page:531
Sinclair, Issue:5B, Page:025

Digimatic Calipers Mitutoyo.

$219.99
Ready to measure right out of the box, no programming. Open jaws with the smooth-feel thumb wheel and read the LCD display. No ...

Product Description

Incredible Value In An Electronic, Direct Reading Caliper; Two Sizes To Choose From

Ready to measure right out of the box, no programming. Open jaws with the smooth-feel thumb wheel and read the LCD display. No reading “between the lines!” If you want to compare dimensions, reset the zero anywhere on the scale, caliper will give plus/minus readings. Close and reset zero and it’s a regular caliper again. Graduations also marked on the beam for a quick manual check. No rack and pinion to get dirty, no delicate glass scale. 6" model bears the brunt of your measuring around the home and shop. 8" version cover those bigger specialized projects like measuring .50 BMG cartridges. Reads to .0005"/0.01mm; (Five, TEN thousandths). Accurate to .001" (0.02mm).


1911, Issue:04, Page:050
Big Book Catalog, Issue:71, Page:440
SPECS: 9-1/16" (23.1cm) overall. Stainless steel. Plastic hard case; includes battery.

Lock-N-Load Bullet Comparator Basic Set Hornady.

$37.99
The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for ...

Product Description

The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts.


Big Book Catalog, Issue:68, Page:532
Sinclair, Issue:5B, Page:028

Swage Gage™ Primer Pocket Gauge Ballistic Tools.

$12.99
Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. ...

Product Description

Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass.


Sinclair, Issue:5B, Page:004


Comments(0)

Leave a comments