Web Analytics Made Easy -
    StatCounter

Mark 2 Ims Integral Riser Mount Leupold

Shop for Low Price Mark 2 Ims Integral Riser Mount Leupold .Compare Price and Options of Mark 2 Ims Integral Riser Mount Leupold from variety stores in usa. products sale.

"Today, if you do not want to disappoint, Check price before the Price Up.Mark 2 Ims Integral Riser Mount Leupold You will not regret if check price." who sells the cheapest Mark 2 Ims Integral Riser Mount Leupold on line

Content:

Mark 2 Ims Integral Riser Mount Leupold.

$92.99
The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to ...

Product Description

The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to AR-style rifles; scope height and eye relief. Each aluminum IMS cantilever design mounts directly to the firearm’s Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. Mark 2 Rail provides the same advantages as the Mark 1, plus the added benefit of easy-to-grasp ½" hex nuts on the crossbolts for quick release removal and installation. All Leupold IMS products are tested to endure the rigors of the field and are covered by the Leupold Full Lifetime Guarantee.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Sinclair, Issue:5B, Page:202

Steel Extension Bases Warne Mfg. Company.

$13.68 - $15.61
Designed to help correctly position compact scopes, or make adjustments to eye relief on standard scopes. Accepts Weaver-style and Warne Maxima Rings. Measurement ...

Product Description

Simplifies Mounting Of Compact Scopes, Accepts Weaver-Style Rings

Designed to help correctly position compact scopes, or make adjustments to eye relief on standard scopes. Accepts Weaver-style and Warne Maxima Rings. Measurement shown indicates additional ring groove spacing over standard Warne Maxima base groove spacing. Note: front extension bases can be used as rear extension bases on some rifles.


Big Book Catalog, Issue:68, Page:279
SPECS: Steel, blue polished finish (Reg), blue matte finish (Matte), or silver, matte finish (Silver). Three models to add an additional .554”, .700”, or .854” to ring groove spacing. Accepts Weaver-style and Warne Maxima rings. Can be combined with a standard Warne base to achieve proper ring spacing. Measurements shown are added ring groove spacing.

Fits #1 - Fits BSA Monarch; Carl Gustav 2000; Charles Daly; Churchill Highlander; CIL 972C; Colt 57; Enfield Win 70 Style; H&R (Pre-1973) 300, 301, 330, 370; Herters U-9 Round Top; Howa 1500, 1700; Interarms Mark X, Viscount; Kimber M89 BGR; Marlin 455; Mauser 98; Mauser FN (Military Model); Montana; Mossberg 1500, 1700; Musgrave MK III & MK IV; Navy Arms Country Boy Muzzleloader; Parker Hale 1000, 1000C, 1100, 1200, 1700; Raptor Arms Long Action; Rem 21, 78, 600, 660, 670, 673, 700, 700ML, 722, 725, 798, Seven, New Model 7, XP100; S&W 1500, 1600, 1700; Sauer 90, 200, 202; Sav Pre-2003 bolt action flat receiver, all centerfire Accu-Trigger; Shilen Round Receiver; Stevens 200; Voere 2150, 2165-1, 2165-2, 2165-3, 2165-4; Weatherby Mark V Magnum; Vanguard; Win 88, 100, 70 Std. Pre- & Post-64 .860 RHS, 70 Pre-64 Magnum; Sav Pre-2000 bolt action flat receiver, Accu-Trigger all centerfire.

Fits #2 - Fits BSA Monarch; Churchill Highlander; Herters U-9 Round Top; Howa 1500, 1700; Raptor Arms Long Action; Rem 78, 700, 700 ML, 721, 725

Remington 700, Howa 1500 Long Action Xtreme Tactical 1-Piece Base Burris.

$64.99
The new Remington 700 and Howa 1500 Long Action Xtreme Tactical one-piece bases offer the perfect mounting solution for precision shooters. In ...

Product Description

The new Remington 700 and Howa 1500 Long Action Xtreme Tactical one-piece bases offer the perfect mounting solution for precision shooters. In addition to greater strength and rigidity, the 25 MOA cant offers extended range capability

Imuns Night Sight Mount Badger Ordnance.

$301.99 - $339.99
Installs into any Accuracy International Chassis (except AS 50’s), replaces the current bipod mounting block and allows the use of clip on ...

Product Description

Installs into any Accuracy International Chassis (except AS 50’s), replaces the current bipod mounting block and allows the use of clip on night vision devices such as the A/N PVS-22, A/N PVS-24, A/N PVS-27 or other devices like thermal imagers or fusion devices. The IMUNS has a side accessory rails that allow the use of laser aiming devices such as the ATPIAL/DBAL and all other issued aiming lasers. The mount retains the bipod socket for the AI bipod and also allows for the use of a Harris style bipod. No permanent modification is required. Weight: 12.0 Oz.

Browning X-Bolt Short Action Hd Scope Bases Egw.

$119.99
EGW Browning X-Bolt Short Action Heavy Duty Steel Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your ...

Product Description

EGW Browning X-Bolt Short Action Heavy Duty  Steel Scope Bases.

Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from hardened steel with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Heavy Duty (HD) mounts are .100" lower than the Lightweight mounts to minimize weight and keep your optic closer to the barrel centerline for improved accuracy. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid 4140 carbon steel pre-hardened to Rc 35-35 before machining. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite.

Savage B-Mag Scope Bases Egw.

$36.99
EGW Savage B-Mag Scope Bases. Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. ...

Product Description

EGW Savage B-Mag Scope Bases.

Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.


Comments(0)

Leave a comments