Mark 1 Ims Integral Riser Mount Leupold
If you find product , Deals.If at the time will discount more Savings So you already decide you want have Mark 1 Ims Integral Riser Mount Leupold for your, but you don't know where to get the best price for this Mark 1 Ims Integral Riser Mount Leupold . We already done the research and spend a lot of time for you. Mark 1 Ims Integral Riser Mount Leupold to find out where to get the best deal on Mark 1 Ims Integral Riser Mount Leupold.
Mark 1 Ims Integral Riser Mount Leupold.
The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to AR-style rifles; scope height and eye relief. Each aluminum IMS cantilever design mounts directly to the firearm’s Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. Mark 1 locks into place on the receiver with two, flush-fitting T-15 Torx® cap screws. All Leupold IMS products are tested to endure the rigors of the field and are covered by the Leupold Full Lifetime Guarantee.
AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Sinclair, Issue:5B, Page:202
SPECS: Aluminum, hardcoat anodized finish, matte black. Steel crossbolts. 5½" (14cm) long.
Tikka T3 Heavy Duty Scope Bases Egw.
EGW Tikka T3 Heavy Duty Scope Bases.
Add the versatility of a one-piece Picatinny scope rail with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Heavy Duty mounts are .100" lower than the Lightweight mounts to minimize weight and keep your optic closer to the barrel centerline for improved accuracy. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid extruded 7075 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite.
Big Book Catalog, Issue:71, Page:258
European Dovetail Maxima Rings Warne Mfg. Company.
Fits Tikka, BRNO/CZ 527 &BRNO Integral Bases
Vertically split, rings attach directly to the factory integral dovetails on BRNO/CZ 527 rifles with 16mm Dovetails. TORX screws lock scope, rings and rifle into one solid unit.
Big Book Catalog, Issue:71, Page:270
SPECS: MIM Steel, powder coated black, matte. Height measured from top of base (or integral dovetail) to the inside bottom of ring.
Century Ak Lower Rail Optic Mount Rs Regulate.
The Foundation of a Rock-Solid Red Dot Sight Installation on Your Century AK
The AK-309M Century Lower Optic Mount extends the benefit of RS Regulate’s modular AK-47 optic system to Century Arms C39V2 and RAS47. These rifles have a proprietary side rail that makes won’t accept RS’s other "lower" optic mounts. But now that problem is solved! With the AK-309M you can install a modern, up-to-date red dot optic on your Century AK.
The RS AK-300 system pairs a "lower" mount that attaches to the side rail of a Kalashnikov pattern rifle with an "upper" mount that interfaces with a specific optic model. This system makes it possible to securely - and precisely - mount popular AR-15 tactical optics on an AK platform rifle.
The RS Regulate mounting system is purposely designed not to require replacement of actual components on the rifle. More importantly, it will NOT interfere with the reliable operation of the rifle. A low-profile Titanium locking clamp grabs the rail tightly, and does not protrude from the mount or interfere with the triggerguard.
- Lightweight & strong 6061 T6 aluminum construction
- Durable matte black hardcoat anodized finish
- Installation hardware included
- Fits Century Arms C39V2 and RAS47 rifles with full-length side rails ONLY
- Optic-specific upper mount required, sold separately
Once matched with an upper mount, the AK-309M Century lower optic mount allows the user to adjust both the over-bore height and front-to-back position of the optic to ensure it is placed for perfect eye relief and a comfortable head position.
Twistmount For 3x Magnifier Aimpoint.
Quick-detach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB shooting modes. Simply depress the release lever, twist the Magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps Picatinny-style rail; extra-long scope ring provides ample surface contact area for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra TwistMount bases sold separately, so you can quickly move your Magnifier from one rifle to another. Co-Witness Spacer (available separately) raises sight axis for proper co-witnessing with factory-height backup iron sights. Blends smoothly into contours of mount for a streamlined one-piece appearance. Comes with four, extra-length hex head screws and Allen wrench.
AR-15, Issue:11, Page:097
Big Book Catalog, Issue:71, Page:277
SPECS: Aluminum, hardcoat anodized, matte black.
Remington 870 Scope Bases Egw.
EGW Remington 870 Scope Bases.
Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Big Book Catalog, Issue:71, Page:258