K5 Mount For 5000 Series Kestrel Weather Meters Badger Ordnance
K5 Mount For 5000 Series Kestrel Weather Meters Badger Ordnance.
View the Target & Weather Data Without Moving Your Head
Badger Ordnance’s K5 Mount for Kestrel weather meters clamps to your spotting scope, so you can easily read weather data from behind the scope without changing positions.
The K5 Mount attaches firmly to Picatinny rails at the 3 or 9 o’clock position on your scope (rails not included). Pop the Kestrel into the mount, and it is held securely so it will NOT fall out.
- K5 accepts 5000 Series Kestrel weather meters only
- Made of light, tough, durable reinforced 2200-series polyamide
- Coyote tan color
The Badger Ordnance K5 Mount for Kestrel weather meters clamps to the scope’s Picatinny rail via a simple setscrew; a knurled head makes the screw easy to grasp for initial finger-tightening before you tighten it down for good.
See-Thru Mounts Weaver.
Integral Mount Lets You Use Both Iron Sight And Scope
Extra wide oval opening below the scope allows fast, unrestricted use of iron sights when you're too close to use a scope. All steel, four screw top strap gives 210° surface contact for recoil-proof strength. Integral aluminum base means lighter weight.
Big Book Catalog, Issue:71, Page:274
SPECS: 1" (2.5cm) I.D. Overall height approximately 2" (5.1cm). 3 oz. (85g) per pair. Aluminum lower half, steel cap and screws. Satin blue or brushed stainless finish.
Remington 700 Long Action Mountain Tech Scope Rail Warne Mfg. Company.
“Ounces are pounds, Pounds are pain” The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don’t leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.
- Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
- Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
- Bases feature black zinc coated hardware for “Element Proof” protection.
- Self centering tapered T-15 Torx screws.
- Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Ruger® Sr-22® Handguard Accessory Rails Midwest Industries, Inc..
Bolt-On System For Custom Accessory Mounting Options
Machined aluminum Picatinny-slot accessory rails bolt to the SR-22® factory handguard to provide expanded versatility in mounting sights, lights, vertical grips, and other tactical accessories. Easy, no-drill, no-tap installation using the included hex head screws and the mounting holes already in the handguard. Top Rail attaches to the top of the handguard, and is the same height as the receiver rail for aligning front and rear backup sights or installing a forward-mounted optic. Side/Bottom Rail mounts to the side or bottom of the handguard.
Big Book Catalog, Issue:71, Page:157
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes mounting hardware and Allen Wrench. Top Rail – 9" (22.8cm) long, ¾" high. 4.1 oz. (116g) wt. Side/Bottom Rail – 2¾" (7cm) long, ½" high. 1 oz. (28.3g) wt.
Savage 110-116 Long Action Round Back Picatinny Scope Base Brownells.
Brownells Savage 110 thru 116 Long Action (Round Back Style) picatinny scope bases provide a rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws—no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 4140 billet steel for superb strength and stability, or aluminum models machined from 6061 T6 billet for maximum weight reduction. Matte, black, anodized finish blends with most factory finishes.
Big Book Catalog, Issue:71, Page:256
Ruger® Scopemount® Weigand Combat.
Increases Mounting Options On 77/22 & 77/44
Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
Big Book Catalog, Issue:71, Page:261
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER® 77/22® Scope Mounts RUGER® 77/17® , .22 Rimfire, .22 Magnum, .17 HMR.